TTRS Performance Upgrades
The inline 5 may be the most stout engine ever produced by Audi. 
But for some, the best is simply not enough… A long time customer brought in his 2018 Audi TTRS for a Carbon Cold Air Intake, 4 inch Turbo Inlet, Wastegate Lines and to top it off with a Stage 1 tune all supplied by Unitronic.
UNITRONIC STAGE 1 FOR AUDI TTRS MK3 2.5TFSI EVO
• STOCK POWER: 400HP / 354LB-FT
• After Tune: 476HP / 469LB-FT
Unitronic Stage 1 Performance Software is for vehicles with 91 octane / 95 RON fuel, on a completely stock car. It is the performance upgrade that will result in the most gains! Performance Software for your ECU Box Code is subject to availability. 2019+ models may require to have the hood opened during the flashing process.
UNITRONIC STAGE 2 DSG FOR AUDI TTRS MK3 2.5TFSI EVO
Flashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). Unitronic’s TCU Performance Software calibration enhances the gear shift speeds making them up to 70% quicker. D-mode (Drive) is for everyday daily driving and economy, while S-mode (Sport) is for faster acceleration. Unitronic’s TCU Performance Software unlocks the factory launch control limiter. The OEM launch control limiter blocks the engagement of launch control after only 200 launches.
Unitronic’s Stage 2 TCU Performance Software calibrations increase TCU torque limiters to allow for an increased output. It’s been developed alongside Unitronic’s upcoming Stage 2 ECU Performance Software for the ultimate overall experience. Unitronic’s Stage 2 TCU Performance Software calibrations increase clutch clamping pressure. It is perfect, alongside Unitronic’s Stage 2 ECU Performance Software. This supports an increase in engine torque output and ensuring that the clutches properly grip . This also will help for the higher output to be sustained. Includes all Stage 2 tune variants and all lower software stages as well.
For more info on these products, check out the Unitronic Website by clicking here.
To make an appointment for your TTRS, Audi or European car, please call 425-254-0627. You can also email us by clicking here. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA, across the street from The Boeing Store and on the westside of the Paccar / Kenworth plant.