BMW & Mercedes Benz Repair

BMW & Mercedes Benz Repair

Merc Bmw VWA few weeks back we had a Mercedes-Benz E55 AMG and a BMW 640i in for some repair.

The E55 AMG had a bad exhaust manifold and both catalytic converters. The customer had taken it to the dealer and they quoted them an exorbitant amount of money to fix this simple problem. We were able to find a after market equivalent for over half the price.

The BWW had a bad alternator and battery which we diagnosed and fixed by the end of the day. The battery had been draining for a while. When this happens it will cause the alternator to run double duty. Furthermore, this will also wear out the electronics in the unit.

The Scirocco is the owner’s personal project car that is in the process of receiving a new Audi engine. So stay tuned on more posts about that car.

If you need any repair, a new catalytic converter, exhaust manifold, battery or alternator changed out, we can do it. Feel free to call for a free quote or to schedule an appointment at 425-254-0627 or email us.

Meister Werks European and Import is located 618 Park Ave N, Renton, WA 98057, next to Boeing, one block south from The Renton Landing.

/by

605hp Audi R8 v10

605hp Audi R8 v10

Yesterday we installed a stage two Unitronic tune on this 2011 Audi R8 v10. The stage two tune brings the power up to 605 horse power with 440 ft lbs of torque. To be able to do a stage two tune on this Audi, you must upgrade the exhaust. The tune is optimized to flow better with a more free flowing exhaust. It is also recommended to upgrade to a cold air filter. This will also compliment the exhaust upgrade which also allows for more free flowing air to enter into the engine.

The engine tune will also give the Audi better fuel milage at 1/4 throttle. Unitronic optimized this throttle range for when you are driving in stop and go traffic or driving with the cruise control on.

To make everything look aesthetically pleasing, the customer also installed the carbon fiber engine dress up kit. He also had the wheels painted black and tinted the windows and taillights.

If you are interested in doing this to your Audi, Volkswagen, Porsche or any other European car, please feel free to call us anytime at 425-254-0627. We are located one block south of the Branson Landing in Renton Washington. You can also Email us at meister@meister.us.com.

Audi R8 3 Audi R8 1

 

/by

H&R 2010-2017 Lowering Springs MercedesBenz E-Class

H&R Lowering Springs

H&R Lowering Springs – 52726. Lowers car 1″. Install and alignment extra – Call for pricing

H and R W207 2Fits the Following Vehicles:

  • W207 Mercedes-Benz E-Class Coupe Convertible 2010, 2011, 2012 2013, 2014, 2015, 2016 & 2017
  • 2010-2016 Mercedes-Benz E350 4Matic V6.3498cc
  • 2010-2016 Mercedes-Benz E350 Base V6.3498cc
  • 2011-2013 Mercedes-Benz E350 Bluetec V6.2987cc
  • 2012-2014 Mercedes-Benz E550 4Matic V8.4663cc
  • 2010-2011 Mercedes-Benz E550 4Matic V8.5461cc
  • 2012-2017 Mercedes-Benz E550 Base V8.4663cc
  • 2010-2011 Mercedes-Benz E550 Base V8.5461cc
H and R W207 4 H and R W207 3 H and R W207 1

About H&R

Every spring produced by H&R comes from the ISO 9001 certified engineering and manufacturing facility in Germany. All  springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.

These Sport Springs offer the handling characteristics and aggressive appearance that you’ve been looking for, without the harsh ride characteristics of less-advanced spring systems. These Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Features:

  • Lowers 1.5-2.0 inches on average
  • Superb ride quality
/by

Wheel Spacers – We’ve got ’em

European Wheel Spacers

Wheel Spacers 5x100 5x112Wheel spacers are designed to push the wheels out a little more from the stock location giving your car a more flush look. These Simply Spacers wheel spacers are made just for Meister Werks. These spacers are made from 6061 T6 aluminum and are made from the same heat treated aluminum wheels are made from.
SpacersThis week we organized all of our wheels spacers. We have a plethora of thicknesses and sizes in stock. 5, 10, 15 and 20mm are in stock. We have spacers for 5×120 BMW, 5×100 & 5×112 VW /Audi, 4×100 VW and 4×108 Volvo.

On sizes over 5mm, you will need longer or extended lug bolts. We have many sizes and lengths in stock as well. 40mm – 50mm cone or ball seat and 12 x 1.5 and 14 x 1.5 thread sizes.

Next, our spacers are also guaranteed to be perfectly hub centric and balanced. These are not like the cheap ones you buy at the auto parts store. They are machined to an exact specification to fit your OEM hubs with no problems.

Call 425-254-0627 or email us to get your spacers today. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA. We are open from 9am – 6pm M-F and 10am – 3pm Saturdays. We will even ship them directly to you for $6 for a set of two.

/by

Dueling BMW X5

Dueling BMW X5

As we’ve said, we always get the same cars in twos. Last week it was two BMW X5 SUVs. The black BMW X5 was in for oil leak on the drain plug, brakes and brake fluid flush. The silver BMW X5 was in for misfiring. After a thorough inspection we found that most of the coil packs were failing.

Dueling BMW X5

BMW X5

The X5 is a mid-size luxury crossover produced by BMW. The first generation of the X5, with the chassis code E53, made its debut in 1999.

Repair

These platforms are known for their cooling system issues. Water pump, thermostat and coolant reservoirs are a common fail point. Next issues we see are oil leaks. Valve cover gaskets are very common and should be taken car of ASAP. If you don’t, you will have oil leak all over the engine which can break down seals, hoses and other engine components. Using the correct coolant is very important. If you don’t use the correct coolant, it could corrode everything in your cooling system.

Brake wear tends to be higher than other vehicles. We commonly do brakes on these platforms. Due to their weight, they tend to wear out rotors faster than other vehicles as well. Modern day rotors are made with a softer compound and the pads with slightly harder. This increases brake wear requiring you to replace all of the components when we do brake jobs.

The last thing we see a lot of is coil packs. They are notorious for coil packs failing. Bad coil packs will cause misfires and is very common.

Call 425-254-0627 or email us to make your appointment. Meister Werks European & Import is located one block south from The Renton Landing in Renton, WA.

 

/by

Mercedes Benz SL500 Custom Work

Mercedes Benz SL500 Custom Work

Meister Werks European & Import in Renton, WA, one block south of The Renton Landing did some custom work last week. We worked on this Mercedes Benz SL500. The customer was leaving on a road trip and wanted to get a few things done before the trip.

We installed the customer’s new wheels and tires and lowering arms on the leveling sensors. This allows the car’s factory air suspension to measure the height lower and will set the car at a lower stance. After installing the leveling arms, we did a four-wheel alignment, which make the alignment centered to avoid any excessive wear that occurs after lowering the Mercedes.

We also installed an Ex-Lip Pro kit on the front bumper and side skirts. Quick detail and some tire shine helped the Mercedes Benz look brand new.

When we finished we performed at courtesy thirty-point inspection on the car. We found a few minor things the customer should be aware of. The more critical item was the brake fluid had a moisture content of +4%. The moisture content can never be above 2%, 0% is the best. We informed the customer that he really needed a flush the brake fluid to prevent any damage to the brake master cylinder or brake calipers. Moisture can break down the system, causing corrosion and make the brakes feel spongy.

SL500

/by

Meister Werks + Liqui Moly

Meister Werks + Liqui Moly

Meister Werks European and Import is now your source for all Liqui Moly Products. They carry everything from spec motor oil, gear oil, transmission fluid, gas / DPF cleaner / additives to even cv axle grease and everywhere in between.

Liqui Moly 5w30 Longlife Hightech Liqui Moly 5w40 Synthoil Liqui Moly Anti Friction Liqui Moly Jectron Liqui Moly 10w60 Race Tech

What we always carry in stock:

  • 5w30 Longtime High Tech
  • 5w40 Synthoil
  • 10w60 RaceTech
  • 75w90 GL4 / GL5 Gear Oil
  • MoS2 Anti-Friction Engine Treatment

Call us today to see what other Liqui Moly products we have in stock for your European vehicle. We can get most products same day if it’s not in stock.

Liqui Moly Renton WA

About Liqui Moly

LIQUI MOLY is Germany’s most popular brand of motor oil. For years, awards such as “Top Brand” or “Best Brand” have reflected our excellent reputation among both experts and end consumers. These series victories are anything but a coincidence or merely automatic. They are the result of the daily commitment of our more than 750 employees. It is this togetherness that makes us strong, that makes us special, that makes us successful around the world. It is this “us” that makes our brand!

MADE IN GERMANY

As a hotbed of ideas with Swabian roots and a conscientious global player, we only research, develop and manufacture in Germany, even today. And we have been raising the bar in terms of quality and service for 60 years. Our solutions are largely based on our own recipes, which we permanently test and adapt to the latest technical circumstances. Continuous quality inspections – from raw material deliveries, to production, right through to shipment – ensure maximum peace of mind.

/by

Porsche 911 Carrera 4S – Engine Rebuild

Porsche 911 Carrera 4S Cabriolet – Engine RebuildPorsche 911 Carrera 4S 996

Last week at Meister Werks European & Import in Renton, WA, next to The Renton Landing, we completed a engine rebuild on this Porsche 911 / 996 Carrera 4S. We pulled the engine out and found that bank 1 (cylinder 1, 2 & 4) have very low compression on 2 & 3, zero compression on cylinder 1. We knew right away the engine needed a rebuild. The block was stripped all the way down to the block and rebuilt with all new components. This also included new IMS bearings.

Next we had the heads remachined and all new valves installed. That followed by new head gaskets, timing chains and guides. New water pump and other key components were also replaced.

After the entire Porsche engine was finished we restored this engine back to it’s 2004 glory. This AWD Porsche flat 6. 3.6L boxer engine puts out 315 hp and 273 ft lbs tq.

We will also be breaking in the engine for the customer, which takes about 1000 miles. No red line and no excessive idling will be allowed until after the break in period is over. After that period, we will need to drain the break in oil / filter and replace it with fresh oil. After the break in period, the car can be driven normally or taken to the track for some hot laps.

If you need your Porsche serviced or engine rebuilt, give us a call for quotes. We can be reached at 425.254.0627 or email us at meister@meister.us.com

/by

Ksport Control Pro Coilovers Specials – JDM Applications

JDM Ksport Control Pro Coilovers Specials

  • 36 way adjustable dampening
  • Lower strut/shock height adjustability
  • Camber Plates built in

$850 + WA ST Sales Tax

  • Nissan 03-08 350z
  • Honda 14-15 Civic Si
  • Honda 06-11 Civic FD1
  • Acura 02-06 RSX
  • Scion 11-UP TC & 15-UP IM
  • Honda 13-17 Accord

$800 + WA ST Sales Tax

  • Honda 89-91 Civic/CRX
  • Acura 90-93 Integra
  • Honda 92-95 Civic
  • Acura 94-01 Integra
  • Honda 96-00 Civic EK

Come in today to reserve yours. While supplies last. Shipping to anywhere in the USA, $45

Call 425.254.0627, Email us or come in – 618 Park Ave N, Renton, WA 98057 – 1 block south from The Renton Landing.

Ksport Kontrol Pro Coilovers

Ksport Kontrol Pro Fully Adjustable Coilover

Ksport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your vehicle, both on the street or at the track.  36 levels of damping adjustment allow fine tuning of the damper to suit both handling and comfort needs.  The damping adjustment alters compression and rebound simultaneously, for more effective and user-friendly setup changes.

Pillow ball top mounts

Pillow ball top mounts in the front and rear on some applications allow the vehicle to install and setup to OEM specifications.  Ksport’s patented upper pillow ball mount offers the same level of adjustability and performance, but allows for compliance that is often required from high-demand strut applications.
On applicable models, the pillowball upper mounts offer camber adjustment, saving the need for a special, separate camber kit.  For enthusiasts seeking the ultimate in adjustability, Ksport’s advanced upper pillow ball mount is available on some applications, giving the option for separate camber and caster adjustment.

Most applications utilize an adjustable lower mount, which means height adjustability without losing suspension travel—a problem found in many coilover systems available today.  Since mounts and most pieces in the coilover system are designed from 6061 billet aluminum, the components are lightweight, durable, and rust resistant.  Steel shock bodies are electroplated with zinc to resist rust and protect from the elements.  The shock or strut valving for each piece is matched accordingly to the spring rate, giving superior ride quality and reliability.

Monotube Design

The Ksport system uses a monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube construction, the monotube design dissipates heat faster and more evenly, allows finer damping adjustments, and requires more expensive design process.  Aeration and cavitation issues are a lot less common in a monotube design, which results in a more consistent ride quality.

The Ksport Kontrol Pro Coilover system has been designed with professional road racing in mind, offering extremely high value and performance for any application.

/by

Powder Coating Fun

Powder Coating

Today at Meister Werks European & Import in Renton, WA, we had a little down time to powder coat our 75 year old vise. Lollypop red over heavy silver, shattered glass and candy gold. Powder coating is process where you take any raw metal (steel or aluminum) and electrostatically applied.

Powder Coated Vise

 

 

 

/by